Skip Top Navigation

Chemical Safety

Safety Data Sheets (SDS)

Login with your UHCL credentials to Search for Safety Data Sheets (SDS) on the chemicals you will work with: EHS and SDS hub software. All UHCL emails can login to access SDS through this link using UHCL credentials.  

Go to the Safety Data Sheets (SDS) page for additional information, and manufacturer's links to obtain SDS for your lab or chemical inventory.  

Hazard Communication

Chemical Labels 

All chemical containers must be labeled with the original manufacturer's label, or: 

  1. Replacement Label if the original container label gets damaged or becomes illegible.
  2. Secondary Container Label filled out with chemical name and hazards checked to meet Hazard Communication requirements.
  3. Small Containers or Samples – can have one or combination of:
    • A label hanging on the container or attached using tape;
    • Logbook visible in the lab nearby with chemical name and hazards, when only sample number may fit on the container;
    • Acronyms list posted in the lab nearby with chemical name and hazards, when only acronym may fit on the container.

Chemical Labels & Labeling - Replacing original labels, labeling secondary containers (prepared solutions, samples), and Wastes. 

Not Food or Drink Labels - Print on Avery 5160 return address labels and place on consumable items used for lab experiments.

Hazard Communication Plan (pp. 64-71)

Banned / Restricted Chemicals - Methylene Chloride  

The Environmental Protection Agency, under the Toxic Substances Control Act (TSCA), has ruled that methylene chloride (CAS# 75-09-2, also identified as dichloromethane or DCM) poses an unreasonable risk of injury to human health.

This new rule bans manufacturing, importing, or selling methylene chloride; and applies to all products and mixtures containing 0.1% or more methylene chloride.

Only limited, restricted uses in laboratories and solvent welding are allowed under the new rule--with extensive requirements including: increased equipment, training, exposure monitoring, and service costs which would fall on users.

EPA Exposure Limits are very low, and prohibits filtering respirators to control exposure--only supplied air/SCBA tanks may be used.

Controlled (Drug) Precursor Chemicals and Glassware 

Physical High Hazard Materials

Peroxide Forming, Potentially Explosive Chemicals (PEC's)

All peroxide forming containers should have a peroxide label on them. Labels and test strips are in the stockroom.  The storage area sticker should be placed above the shelf where peroxide formers are stored, in a flammable cabinet. 

Testing for peroxides is required, often annually, and before distilling or concentrating.  Failure to test and manage inventory can lead to a potentially dangerous explosive situation, and require dedicated costly high hazard stabilization waste disposal.

Old, unknown age, poor condition, or crystallized peroxide formers (inside bottle or under cap) should not be opened or moved as they may pose an explosion risk.  

Notify Hank via email at Grotewold@uhcl.edu for those high hazard waste pickup needs.

Back to Lab Safety Page

Contact

  • Environmental, Health and Safety

    Phone: 281-283-2106
    Email: ehs@uhcl.edu

    Central Services Building
    2700 Bay Area Blvd
    Houston, TX 77058


    Office Hours:
    Monday - Friday, 8 a.m. - 5 p.m.